Multi 12 Drug Test

Multi 12 Drug Panel Test is a rapid test for the simultaneous, qualitative detection of; OPI-MOP300, MDMA500, OXY100, PCP25, COC300, MTD300, BAR300, BZO300, AMP1000, MET500, TCA1000, THC50, in human urine.

For healthcare professionals including professionals at point of care sites. Immunoassay for in vitro diagnostic use only.

It works effective and efficient for detecting drug substances and metabolites in urine sample.

Test Procedure

1. Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC)
   prior to testing.
2. Bring the pouch to room temperature before opening it. Remove the test panel from the
   sealed pouch and use it within one hour.
3. Remove the cap.
4. With the arrow pointing toward the urine specimen, immerse the test panel vertically in
   the urine specimen for at least 10 to 15 seconds. Immerse the dipstick to at least the
   level of the wavy lines, but not above the arrow on the test panel.
5. Replace the cap and place the test panel on a non-absorbent flat surface.
6. Start the timer and wait for the colored line(s) to appear.
7. The drug strip result should be read at 5 minutes. Do not interpret the result after 10
   minutes

Click here for more info!